Home Assistant docker compose

This compose sets up Home Assistant and services used by it

hass

Home assistant container.

The image is specially built with the following features

Home Assistant doesn't run as root
/config is a volume
/home/hass/.local/lib is a volume to make pip cache persistent between rebuilds
Port 8123 is exposed by default
Added a healthcheck
If the env variable WAITDB_HOST is set Home Assistant doesn't start until the mysql database at that host with username WAITDB_USER and password WAITDB_PASS is available.

Available on all networks. Make sure to select all network adapters as active under Configuration->General->Network so discovery works.

To update:

> docker-compose build --pull hass
> docker-compose down hass
> docker-compose up -d hass

db

Mariadb for Home Assistant use.

dbadmin

PHPMyAdmin container for tweaking the database if necessary. Start when needed.

mqtt

Mosquitto server.

Exposed to IOT network (which is also accessible from LAN thanks to its netmask).

influx

Storage for Home Assistant sensor data

grafana

For pretty plotting of data from influx

deconz

Deconz container

/dev/conbee is created on the host by a udev rule in /etc/udev/rules.d/10-conbee-local.rules:

  ACTION="add", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6015", SYMLINK+="conbee"

VNC is activated with password secret. This is not exposed outside of the docker internal network, though (can be connected to with e.g. a guacamole container).

A simple healthcheck is added for stability.

plejd

plejd2mqtt container

https://github.com/thomasloven/plejd2mqtt - a standalone version of a Home Assistant add-on which connects plejd via bluetooth to MQTT.

Access to the bluetooth bus is required through /var/run/dbus.

Mobile

pajikos/sms-gammu-gateway exposes GSM modem functionality via REST.

/dev/gsmmodem is created on the host by a udev rule in /etc/udev/rules.d/999-gsm-modem.rules:

  ACTION=="add", ATTRS{idVendor}=="2001", ATTRS{idProduct}=="ac01", RUN+="/usr/sbin/usb_modeswitch -K -v 2001 -p ac01 -V 2001 -P 7e3d"

SUBSYSTEM=="tty", ACTION=="add", ENV{ID_VENDOR_ID}=="2001", ENV{ID_MODEL_ID}=="7e3d", ENV{ID_USB_INTERFACE_NUM}=="01", SYMLINK+="gsmmodem"

This requires usb-modeswitch to be installed on the host, and the exact commands vary greatly from device to device. The above works for my D-Link DWM222, but may or may not work with your D-Link DWM222.

Health check added for stability

2.5 KiB Raw Blame History